SharewareGuide.net
More Articles Category
Sharewaregudie.net > Articles > Video Article > iPhone Video
Review of iPhone Video Converter, iPhone Converter, iPhone Video
08/06/2008 19:01:16

Review of iPhone Video Converter, iPhone Converter, iPhone Video. 

Featuring 3.5-inch screen, which has a resolution of 320-by-480 pixels at 160 pixels-per-inch display, iPhone becomes a perfect video player for people to kill time on a long journey. I also prefer to take my iPhone with me during the trip and enjoy videos and music on it.
 
Here is some knowledge of mine towards iPhone:

1. Audio/video file formats and encoding formats supported by iPhone
2. Suitable parameters of audio and video to get the most use of iPhone
3. Useful audio and video conversion software I knew
 
Part One: Summery of iPhone supported formats

Audio/video file formats and encoding formats supported by iPhone:
File formats  Encoding formats
  *.mp4           mpeg4
  *.m4v            h.264
  *.mov            h.264
  *.m4a           mpeg4aac
  *.mp3           mp3
  *.wav            pcm_s16le

iPhone supported video resolutions:
720*480, 720*406, 640*480, 480*320, 480*270, 320*240

iPhone supported video bit rate:
The highest value of video bit rate supported by iPhone is 2500K. If video bit rate is larger than 3000K, imported video only has sound but no picture. (BTW, I got this conclusion by my personal test) Software I used: Xilisoft iPhone Video Converter 
 

Part Two: Personal experience of this software:

 

First, download to install and run Xilisoft iPhone Video Converter.

 

The interface of this software is clear and user-friendly.


Get the supported audio and video formats showed below.

 

 

 

The supported Zoom mode and Split mode below.

 

        

                

On the right top section of the interface, there is a window for you to modify advanced parameters. You can choose from different parameters to meet your different needs of the conversion. For the details, you can get from the Help document of this software.


On the right bottom of the interface, there is a preview window. This enables you to preview the selected audio/video file.

 

Second, add original audio/video file you want to convert.

 

 

You know what you are going to do at a glance of the iPhone video converter. I think it is really easy to handle.

 

Third, some preparations need to do before the conversion.

The most important thing you need to do is select Profile according to your need. 
Select Zoom mode and Split mode. 
Select the destination for the output files.
Modify default advanced parameter. Users can neglect the default parameters in the list. If you are professional and want to get the details of these parameters, you can get from Help document of the software.

 

Fourth, perform the conversion.


This software is really user-friendly and easy-to-handle. Maybe there is no need to express too much to guide.

 

Fifth, import the output files to iPhone.

 

There are two options to complete this step. One is sync the output files through iTunes. The other is through iPhone management software to import files to iPhone.

 

 

Part Three: Test of videos

 

 

I have first tested the four video profile provided by the software. Just keep the original default parameters unchanged.
Video source:
Parameter:

Video format: WMV3X  Audio format: wma9
Resolution: 640*480  Bit rate: 128k
Bit rate: 1500K  Sample rate: 44100
Frame rate: 30fps  Channel: 2
Get following results: (output files displayed on iPhone)

 

 

1. iPhone MPEG-4(320*240)(*.mp4)
Parameter:

Video encoder: mpeg4 Audio encoding rate: mpeg4aac  
Video resolution: 320*240 Bit rate: 80K
Bit rate: 1200K Sample rate: 44100
Channel: 2
Comments: The output is very good. Resolution of iPhone display is 320*480 and 480*320 if you hold it transversely. When you display 320*240 videos, the top and bottom of the picture will be cut off. The sound is fine too.

 


2. iPhone MPEG-4 480P(*.mp4)
Parameter:

Video encoder: mpeg4  Audio encoding rate: mpeg4aac
Video resolution: 640*480 Bit rate: 128K
Bit rate: 1500K  Sample rate: 44100
Channel: 2
Comments: The result is the same as iPhone MPEG-4(320*240)(*.mp4), while this is just my personal opinion.

 

3. iPhone MPEG-4(480*320)(*.mp4)
Parameter:

Video encoder: mpeg4  Audio encoding rate: mpeg4aac
Video resolution: 480*320 Bit rate: 80K
Bit rate: 120K  Sample rate: 44100
Channel: 2
Comments: Resolution of the picture is just the same as that of iPhone display. Picture is fully displayed. If you display the video via QuickTime on IBM laptop, you will get much clearer videos.

 

4.  iPhone MPEG-4 wide screen (*.mp4)Parameter:

Video encoder: mpeg4  Audio encoding rate: mpeg4aac
Video resolution: 720*406 Bit rate: 128K
Bit rate: 1500K Sample rate: 44100
Channel: 2
Comments: Picture is almost fully displayed and is much clearer than displayed on IBM via QuickTime. Since the resolution of video source is 640*480 and the resolution of output video is 720*406, therefore the result of this presetting is not representative. I will test this profile with HD video source later.

 


Part Four: Other functions of this software

Allow to check over information of source files.
Feature several skin options.
Support multi-language including Simplified Chinese, Japanese, German and English.

 


Part Five: Conclusion

 

 

In general this software is user-friendly and easy-to-handle. It can meet different needs for different users. I think if this software can import to iPhone directly, it will be perfect. Maybe the Xilisoft company has already taken this into consideration and is working on the update. And we just wait and see.

 

If you want to know more of this iPhone converter, just click here for the detaied information of this iPhone video converter.

Related Downloads
Related Articles